Marine-grade 316 stainless steel replacement cap
Marine-grade 316 stainless steel replacement cap with a threadless design and integrated O-ring for the BajaMate in-pool umbrella sleeve.
$26.99
316 Stainless Steel Umbrella Sleeve Replacement Cap | BajaMate
BajaMate Foundation Replacement Components
Replace a lost or damaged cap and restore the clean, finished appearance of your BajaMate stainless steel in-pool umbrella sleeve.
The BajaMate 316 Stainless Steel Umbrella Sleeve Replacement Cap is a genuine replacement component designed specifically for the BajaMate Foundation 316 Stainless Steel In-Pool Umbrella Sleeve.Machined from marine-grade 316 stainless steel, the smooth threadless cap presses securely into the sleeve opening when the BajaMate Anchor is removed.A removable O-ring provides a snug fit while helping reduce debris entry, and the stainless steel construction is designed for continuous underwater use in properly maintained chlorinated and saltwater pools.316
Marine-grade stainless steel
Material
316 Stainless Steel
Environment
Permanent In-Pool
Installation
Threadless Press-In
Seal
Removable O-Ring
316 Stainless Steel Umbrella Sleeve Replacement Cap Product Facts
Product Type
Replacement Sleeve Cap
Material
Marine-Grade 316 Stainless
Fits
BajaMate 316 In-Pool Sleeve
Universal Replacement
No
Closure Style
Threadless Press-In
Permanent Submersion
Yes
Replacement Cap for the BajaMate Stainless Steel Pool Sleeve
01
A genuine replacement component made specifically for the BajaMate Foundation 316 Stainless Steel In-Pool Umbrella Sleeve.
When the BajaMate Anchor is removed, the stainless steel replacement cap closes the exposed opening of the Foundation sleeve.Its low-profile metal surface helps the permanent mounting point blend naturally into plaster, pebble, aggregate, tile, and other finished pool surfaces.The cap also helps reduce the entry of leaves, dirt, pebbles, sand, and other debris while keeping the sleeve accessible for future BajaMate installations.Designed Exclusively for the BajaMate 316 Stainless Steel Sleeve
Marine-Grade Construction for Permanent In-Pool Use
316 Stainless Steel
Marine-grade construction is designed for continuous underwater use in properly maintained chlorinated and saltwater pools.Threadless Press-In Fit
The smooth cap presses directly into the sleeve without screw threads that can strip, cross-thread, seize, or collect debris.Removable O-Ring
The included removable O-ring creates a snug friction fit within the compatible BajaMate stainless steel sleeve.Low-Profile Finish
The cap sits neatly within the sleeve opening for a clean appearance across the finished pool surface.Debris Protection
The closed cap helps reduce the amount of dirt, leaves, pebbles, sand, and other material that can collect inside the unused sleeve.Genuine BajaMate Component
Precision-sized specifically for the BajaMate Foundation 316 Stainless Steel In-Pool Umbrella Sleeve.Why BajaMate Uses a Threadless Pool Sleeve Cap
How the Stainless Steel Umbrella Sleeve Cap Works
Remove the Anchor
Lift the BajaMate Anchor from the compatible Foundation 316 Stainless Steel Sleeve.Clean the Sleeve Opening
Remove visible debris and confirm that the sleeve opening, replacement cap, and O-ring are clean and undamaged.Press the Cap into Place
Insert the cap evenly until the O-ring engages the sleeve and the cap reaches its intended low-profile position.316 Stainless Steel Pool Umbrella Sleeve Cap
IN-POOLContinuous underwater use
Marine-Grade Foundation Component
Designed for properly maintained chlorine and saltwater pool environments.
The replacement cap is manufactured from marine-grade 316 stainless steel for use with a permanently submerged BajaMate Foundation sleeve.Designed applications include:- Baja shelves and tanning ledges
- Properly maintained chlorinated pools
- Properly maintained saltwater pools
- Permanent underwater Foundation installations
- Pool surfaces finished in plaster, pebble, aggregate, or tile
A Stainless Steel Finish Instead of Builder-Grade Plastic
02
A marine-grade stainless steel sleeve deserves a replacement cap made from the same pool-ready material.
Builder-grade plastic sleeve caps may fade, crack, deform, discolor, or become brittle after extended exposure to sunlight, heat, pool water, and chemicals.The BajaMate replacement cap uses marine-grade 316 stainless steel for a more substantial feel and a refined appearance that coordinates with the stainless steel Foundation sleeve below.Its smooth metal profile complements plaster, pebble, aggregate, tile, and other premium pool finishes without introducing visible plastic into the installation.What Is Included?
Primary Component
Stainless Steel Sleeve Cap
Material
Marine-Grade 316
Quantity
One Cap
Seal
One Removable O-Ring
Closure
Threadless Press-In
Foundation Sleeve
Not Included
Product Details
Product
316 Stainless Steel Umbrella Sleeve Replacement Cap
Material
316 Stainless Steel
Installation
Press-In Fit
Threaded
No
O-Ring
Included + Removable
Primary Function
Close Unused Pool Sleeve
Compatibility
BajaMate 316 Stainless Sleeve
Permanent Submersion
Designed for In-Pool Use
Installation and Removal
1Inspect
Confirm that the sleeve opening, replacement cap, and O-ring are clean
and free from visible damage.
2Install
Align the cap with the sleeve and press it evenly into place without
forcing or striking it.
3Remove When Needed
Lift the cap carefully whenever the BajaMate Anchor is ready to be
reinstalled.
Care and Pool-Water Maintenance
Maintain Balanced Pool Water
Keep chlorine, salt, pH, alkalinity, and other chemistry levels within the ranges recommended for the pool and installed equipment.Remove Collected Debris
Periodically inspect the cap and surrounding sleeve area for leaves, sand, scale, pebbles, or other material.Clean Gently
Use fresh water, mild soap, and a soft cloth when cleaning the stainless steel surface.Avoid Abrasive Tools
Do not use steel wool, aggressive brushes, or abrasive cleaners that may scratch or alter the stainless steel finish.Inspect the O-Ring
Confirm that the O-ring remains properly seated and free from cracks, stretching, cuts, brittleness, or other damage.Replace Worn Components
Replace the cap or O-ring if damage prevents a secure fit within the BajaMate Foundation sleeve.Frequently Asked Questions
Which umbrella sleeve does this replacement cap fit?
It is designed specifically for the BajaMate Foundation 316 Stainless Steel In-Pool Umbrella Sleeve.Is this a universal pool umbrella sleeve replacement cap?
No. It is not intended for unrelated builder-installed plastic sleeves, BajaMate aluminum deck sleeves, or metal sockets with different dimensions.Can the 316 stainless steel cap remain underwater?
Yes. The marine-grade 316 stainless steel cap is designed for permanent underwater use in properly maintained chlorinated and saltwater pools.Does the replacement cap screw into the sleeve?
No. It uses a smooth threadless press-in design with a removable O-ring that creates a secure friction fit.Does the O-ring make the sleeve completely watertight?
No. The O-ring creates a snug fit and helps reduce debris entry, but the replacement cap should not be treated as a guaranteed watertight plumbing seal.What is included with the stainless steel replacement cap?
The product includes one 316 stainless steel replacement sleeve cap and one removable O-ring. The Foundation sleeve, Anchor, umbrella, and other components are sold separately.When should I replace my pool sleeve cap?
Replace the cap if the original has been lost or damaged, or if wear to the cap or O-ring prevents a secure fit within the compatible BajaMate sleeve.What does the cap do when the BajaMate Anchor is removed?
It closes the exposed Foundation sleeve opening, restores the finished appearance of the pool surface, and helps reduce debris from collecting inside the sleeve.Product Summary
BajaMate Foundation Replacement Components
Marine-grade finish. Precise fit. Built for life underwater.
A genuine 316 stainless steel umbrella sleeve replacement cap with a
smooth threadless press-in design and removable O-ring, made specifically
for the BajaMate Foundation 316 Stainless Steel In-Pool Umbrella Sleeve.