THE BAJAMATE COLLECTION

BajaMate Foundation Sleeves create a durable mounting point for compatible umbrellas, Anchor adapters, Gather tables, and other BajaMate accessories.

They are designed for new pool construction, deck installations, patios, hardscapes, Baja shelves, and replacement applications where a stronger metal sleeve is preferred over a standard plastic sleeve.

Marine-grade stainless steel sleeves are designed for permanent in-pool and submerged installations.

Aluminum sleeves are intended primarily for pool decks, patios, hardscapes, splash zones, and other dry-side installations where long-term submersion is not required.

Yes. BajaMate sleeves can be incorporated into new pool, Baja shelf, patio, and deck construction to create a clean mounting point for future umbrellas, tables, and compatible accessories.

Sleeve placement, drainage, surrounding finish materials, and final elevation should be confirmed with the pool builder or installer before installation.

In many installations, a damaged plastic sleeve can be removed and replaced with a BajaMate metal sleeve. The exact repair method depends on the existing sleeve, surrounding finish, concrete, plumbing, and available installation depth.

Photos and measurements of the existing installation are recommended before selecting a replacement.

BajaMate Anchor adapters fit inside compatible pool, deck, and builder-installed umbrella sleeves to create a stronger, taller, and more stable mounting point for oversized umbrellas.

The wide stabilizing base, centered adapter tube, reducer system, and tightening cap help support the umbrella pole and reduce unwanted movement inside the sleeve.

BajaMate Anchor adapters are designed to fit most compatible standard builder-installed umbrella sleeves.

Sleeve dimensions can vary, so measuring the sleeve opening and internal depth is recommended when compatibility is uncertain. Photos of the sleeve and surrounding area are also helpful.

The adapter extends the usable mounting height above the original sleeve and provides a wider stabilizing surface at the finished pool or deck level.

Reducer rings and the tightening cap help center the umbrella pole, limit side-to-side movement, and keep the umbrella more securely anchored than a loose pole placed directly into a builder sleeve.

The 18-inch adapter is generally best suited to a single-step-down Baja shelf or shallower installation.

The 26-inch adapter is generally best suited to a two-step-down Baja shelf or a deeper installation where additional height is needed.

The listed adapter height refers to the adapter tube and cap—not the finished tabletop height.

Choose marine-grade stainless steel for permanent in-pool use and installations that remain submerged.

Choose aluminum for patios, pool decks, hardscapes, landscapes, and other dry-side installations. Aluminum may tolerate temporary splash or brief water exposure, but it should not remain submerged for extended periods.

BajaMate Anchor adapters use removable reducer rings to accommodate several common umbrella pole diameters, including larger commercial and resort-style umbrella poles up to 2 inches.

Confirm the umbrella pole diameter before ordering when using a third-party umbrella.

The Gather table transforms a compatible BajaMate Anchor adapter into a convenient in-pool or poolside entertaining space for drinks, snacks, conversation, and everyday relaxation.

Its modular design allows it to be installed around the umbrella pole while preserving the central umbrella mounting position.

The tabletop includes integrated drink spaces, silicone cup-holder inserts, and notched areas designed to help organize glasses, beverages, and small serving items.

The two-piece design allows the table to be installed or removed without lifting the umbrella pole completely out of the adapter.

Measure the water depth at the sleeve location before selecting the adapter and table configuration.

The tabletop and support legs should sit above the waterline for comfortable use. The correct combination depends on the shelf depth, sleeve depth, adapter height, and desired finished table position.

Yes. The Gather table can be used around a compatible BajaMate Anchor adapter installed on a patio, deck, hardscape, or other dry-side location.

This creates a compact poolside table between lounge chairs or within an outdoor entertaining area.

Yes. The umbrella can be closed while the tabletop remains installed. Closing the umbrella is recommended during high winds, storms, and whenever the pool area is unattended.

BajaMate pool umbrellas are available in oversized 10-foot, 12-foot, and 14-foot configurations for Baja shelves, pool decks, patios, and outdoor entertaining spaces.

The appropriate size depends on the available space, desired shade coverage, sleeve placement, surrounding structures, and local wind exposure.

Yes. BajaMate umbrellas can be installed on compatible Baja shelves and shallow lounging areas when supported by the correct stainless steel sleeve or in-pool Anchor adapter.

The umbrella pole, mounting system, water depth, and finished height must all be matched to the installation.

Select BajaMate umbrellas are available with an optional solar charging system and integrated USB-C charging access for compatible personal devices.

Charging performance depends on available sunlight, battery state, device requirements, and environmental conditions.

Replacement canopies are available for compatible 10-foot, 12-foot, and 14-foot BajaMate umbrellas.

Confirm the umbrella size, frame model, canopy style, and color before ordering a replacement.

Close the umbrella during high winds, storms, or whenever the pool area is unattended.

Always follow the umbrella manufacturer’s wind and safety guidance. No umbrella or mounting system should be treated as windproof.

An Oasis Complete System combines the primary BajaMate components needed to create a finished poolside destination, including a compatible mounting solution, Anchor adapter, oversized umbrella, Gather table, and selected accessories.

Exact components vary by system configuration, material, height, umbrella size, color, and installation type.

A complete system is ideal for customers who want coordinated shade, table space, and mounting hardware without selecting each primary component separately.

It is especially useful for new Baja shelves, full pool renovations, resort-style upgrades, and installations where the final umbrella and table height can be planned together.

Available choices may include sleeve material, adapter material, adapter height, umbrella size, canopy color, charging options, table configuration, and compatible accessories.

Some combinations are stocked while others may be produced or ordered specifically for the installation.

Measure the sleeve opening, internal sleeve depth, water depth at the sleeve, distance from the sleeve to the finished surface, umbrella pole diameter, and desired finished umbrella or table height.

Photos showing the sleeve opening, surrounding surface, pool shelf, waterline, and nearby structures are also helpful when requesting compatibility assistance.

Many third-party umbrellas can be used when the pole diameter, pole length, weight, canopy size, and operating clearances are compatible with the selected adapter.

Oversized umbrellas create substantial leverage, so compatibility should be confirmed rather than assumed.

Yes. A properly selected BajaMate sleeve and Anchor adapter can create a shared foundation for compatible umbrellas, Gather tables, and other interchangeable BajaMate accessories.

Each accessory must still be matched to the sleeve, adapter, water depth, and intended installation.

Many existing-sleeve adapter installations are straightforward when the sleeve is accessible, undamaged, correctly sized, and properly positioned.

New sleeves, concrete work, pool-finish repairs, electrical features, drainage changes, and structural modifications should be completed by a qualified pool builder or installer.

Rinse stainless steel components periodically with fresh water and clean them using a soft cloth and a mild, non-abrasive cleaner.

Pool chemicals, salt, minerals, sunscreen, and environmental deposits should not be allowed to accumulate on the metal surface.

Rinse aluminum components after exposure to pool water and wipe them clean with a soft cloth. Avoid abrasive pads, aggressive chemicals, and prolonged submersion.

Aluminum adapters used in water should be removed after temporary use rather than left submerged continuously.

Stainless steel adapters may remain installed in appropriate permanent in-pool applications.

Aluminum adapters should be removed after temporary water exposure and stored clean and dry when they are not in use.

Larger umbrellas, premium canopy colors, custom combinations, and certain system configurations may be produced or ordered specifically for the customer.

Special-order products typically require additional production and freight time compared with stocked configurations.

Provide the product you are considering, sleeve measurements, water depth, umbrella pole diameter, desired finished height, and clear photos of the sleeve and surrounding installation area.

More complete measurements and photos allow BajaMate to provide more useful product-selection guidance.