Four BajaMate aluminum table legs with replacement bolts, washers, and Allen keys on a light stone background.

Replacement Table Legs

Premium aluminum replacement legs for Bajamate Table

$99.00

BajaMate Replacement Table Legs – Powder-Coated Aluminum Set of 4

BajaMate Gather Replacement Components

Restore the original support, balance, and clean profile of your BajaMate tabletop.

The BajaMate Replacement Table Leg Set includes four powder-coated aluminum legs and the stainless steel mounting hardware needed to restore a compatible BajaMate table system.Designed specifically for BajaMate tabletops, the replacement legs support the gathering surface while preserving the streamlined appearance of the original system.Their lightweight aluminum construction is suited to pool decks, patios, splash zones, and temporary shallow-water use where the components can be removed, rinsed, and dried after exposure.
4 Replacement aluminum legs
Quantity Set of Four
Material Aluminum
Finish Powder Coated
Hardware Stainless Steel

Restore Your BajaMate Table System

01

Replace worn or damaged legs without replacing the complete BajaMate tabletop.

The replacement set is designed to return a compatible BajaMate table to its intended four-leg configuration.Each aluminum leg installs at the original tabletop mounting location, helping support the gathering surface while maintaining a balanced, low-profile appearance.Replacing all four legs together can also help preserve a consistent finish and installation across the complete table.

Designed as a Complete Four-Leg Replacement Set

01

Four Matching Legs

The set includes the complete group of four supports required for a compatible BajaMate tabletop.
02

Lightweight Aluminum

Aluminum construction makes the legs easier to install, remove, transport, and store.
03

Powder-Coated Finish

The durable exterior finish is designed for sun, splash, moisture, and everyday outdoor exposure.
04

Stainless Steel Hardware

Included mounting hardware provides the required connection between the replacement legs and compatible BajaMate tabletop.
05

Original Mounting Locations

The legs are designed to install at the established mounting points on compatible BajaMate tabletops.
06

Removable System

The legs can be removed when the table is being cleaned, stored, serviced, or reconfigured.

Designed Specifically for BajaMate Tabletops

Compatible BajaMate Table Systems Designed for compatible BajaMate entertainment and Gather tabletops using the supported four-leg mounting arrangement.
Not Compatible Universal or Unrelated Tables These legs are not intended as universal replacements for unrelated pool, patio, marine, or outdoor furniture.
Confirm the tabletop model and mounting-hole arrangement before ordering.BajaMate product designs may evolve over time. Contact BajaMate with photographs of the tabletop and existing leg connection when compatibility is uncertain.

Designed for Wet and Dry Poolside Spaces

USE 01

Pool Decks

Restore a BajaMate table used beside loungers, seating, and outdoor entertaining areas.
USE 02

Patios

Support compatible BajaMate tabletops used for dining, conversation, and outdoor gatherings.
USE 03

Splash Zones

Use the powder-coated aluminum legs in areas exposed to routine splashing when they are properly cleaned and maintained.
USE 04

Baja Shelves

Use the legs temporarily in compatible shallow-water tabletop configurations above the normal waterline.
USE 05

Tanning Ledges

Restore support beneath a BajaMate gathering surface used around in-pool loungers and seating.
USE 06

Seasonal Installations

Remove, rinse, dry, and store the lightweight legs when the outdoor system is not being used.

Aluminum Is Intended for Temporary Water Exposure

Recommended Dry-Side + Removable Use The aluminum legs are well suited to decks, patios, splash zones, and temporary shallow-water installations.
Not Recommended Permanent Submersion The powder-coated aluminum legs should not remain continuously underwater or be treated as permanent submerged pool components.
After exposure to chlorinated or saltwater pool water, remove the legs when practical, rinse them thoroughly with fresh water, and allow them to dry.The use of a marine-grade 316 stainless steel BajaMate Anchor does not make the aluminum tabletop legs suitable for permanent submersion.

What Is Included?

Replacement Supports Four Table Legs
Leg Material Aluminum
Leg Finish Powder Coated
Mounting Hardware Stainless Steel
Tabletop Not Included
Anchor System Not Included

Product Details

Product Type Replacement Table Legs
Quantity Set of Four
Primary Material Aluminum
Surface Finish Powder Coated
Hardware Material Stainless Steel
Installation Original Mounting Points
Compatibility Selected BajaMate Tables
Permanent Submersion Not Intended

Quick Replacement Installation

1 Remove Remove the tabletop from service and detach the existing damaged, worn, or mismatched legs.
2 Position Align each replacement leg with its original mounting location beneath the compatible tabletop.
3 Secure + Inspect Install the stainless steel hardware, then confirm that all four legs are secure and evenly positioned.
Place the tabletop upside down on a clean, padded surface during installation to help protect its finish.Start all mounting hardware by hand before final tightening. Tighten the connections evenly and avoid overtightening, which may damage the tabletop, hardware, or mounting points.Reinstall the table only after confirming that each leg is properly attached and the tabletop is level.

Before Using the Restored Table

Confirm Secure + Balanced Installation Verify that all four legs are seated correctly, the mounting hardware is tight, and the tabletop does not rock or shift.
Do Not Use Loose or Damaged Components Do not place the table into service if a leg, mounting point, fastener, or tabletop component is loose, bent, cracked, or improperly aligned.
The replacement legs restore the table supports but do not repair damage to the tabletop, Anchor, sleeve, or other BajaMate components.Inspect the complete table system before use.

Important Tabletop Safety

TABLE For lightweight items only
Responsible Use

The BajaMate tabletop is a gathering surface—not a seat or structural platform.

Use the table for drinks, snacks, phones, sunglasses, and other lightweight poolside items.Do not sit, stand, climb, dive from, or place heavy concentrated loads on the tabletop or replacement legs.Children should be supervised around all in-pool and poolside furniture.

Care and Maintenance

CARE 01

Rinse After Pool Exposure

Use fresh water to remove chlorine, salt, sunscreen, and poolside residue from the aluminum legs and stainless hardware.
CARE 02

Dry the Components

Wipe the legs dry or allow them to air-dry fully before enclosed or extended storage.
CARE 03

Clean Gently

Use mild soap, fresh water, and a soft cloth to clean the powder-coated finish.
CARE 04

Avoid Abrasive Cleaners

Do not use steel wool, aggressive brushes, bleach, harsh solvents, or abrasive products that may damage the finish.
CARE 05

Inspect the Hardware

Periodically confirm that the stainless steel fasteners remain secure and free from damage.
CARE 06

Store During Extended Non-Use

Remove and store the aluminum components in a clean, dry location when the table will not be used for an extended period.

Frequently Asked Questions

FAQ 01

How many replacement legs are included?

The package includes a complete set of four powder-coated aluminum table legs.
FAQ 02

Is the mounting hardware included?

Yes. Stainless steel mounting hardware is included for attaching the four replacement legs to a compatible BajaMate tabletop.
FAQ 03

Will these legs fit a non-BajaMate table?

No. They are designed specifically for compatible BajaMate tabletops and should not be treated as universal replacement table legs.
FAQ 04

Can the replacement legs be used on a pool deck or patio?

Yes. Their powder-coated aluminum construction is well suited to dry-side pool decks, patios, and outdoor entertaining areas.
FAQ 05

Can the aluminum legs remain underwater?

No. They may be used temporarily in suitable shallow-water or splash-zone installations but are not intended for permanent submersion.
FAQ 06

Is the BajaMate tabletop included?

No. This listing includes four replacement legs and the applicable stainless steel mounting hardware. The tabletop, Anchor, sleeve, umbrella, and related accessories are sold separately.

Product Summary

BajaMate Gather Replacement Legs Restore the support. Refresh the appearance. Return the table to the poolside experience it was designed to create. A complete set of four powder-coated aluminum replacement table legs with stainless steel mounting hardware, designed for compatible BajaMate entertainment and Gather tabletops used on pool decks, patios, splash zones, and temporary shallow-water installations.

you May Also Like

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.